In MA what reports do I need to print off my VR ATG to maintain monthly compliance for my tanks and lines?

 

SW tanks need monthly passing CSLD or 6 hour static test results. These can be obtained from your VR ATG. From the All Functions Normal Screen. Press the function key until CSLD Test Results are displayed. Press print. Or if testing 6 hours. From the All Functions Normal Screen. Press the function key until In-Tank Test Results are displayed. Press print. SW lines require an annual 3rd party line test.
DW Tanks and DW Lines require continuous interstitial monitoring. These need monthly reports documenting the DW sensors in a normal status. From the All Functions Normal Screen. Press the function key until either Liquid Status, 2 Wire CL Status, 3 Wire CL Status or Smart Sensor Status are displayed. (this all depends on which type of sensor is installed for your application). From these screens press print to achieve the desired report.

SW tanks need monthly passing CSLD or 6 hour static test results. These can be obtained from your Veeder Root ATG. From the All Functions Normal Screen. Press the function key until CSLD Test Results are displayed. Press print. Or if testing 6 hours. From the All Functions Normal Screen. Press the function key until In-Tank Test Results are displayed. Press print. SW lines require an annual 3rd party line test.DW Tanks and DW Lines require continuous interstitial monitoring. These need monthly reports documenting the DW sensors in a normal status. From the All Functions Normal Screen. Press the function key until either Liquid Status, 2 Wire CL Status, 3 Wire CL Status or Smart Sensor Status are displayed. (this all depends on which type of sensor is installed for your application). From these screens press print to achieve the desired report.

Don’t have the time or knowledge to watch your ATG all the time?  Leave it to the professionals!  Call ECS Eclipse today to learn about our release detection and remote monitoring services!

413-789-3530

Go back